Concrete cutting in Atherton CA - clean openings with no extra breakout
Need a doorway in a foundation wall, a trench in a floor or a hole for pipe? We cut only what the job needs.
How do you cut concrete without breaking up the rest of the slab?
Concrete cutting in Atherton uses diamond saws and diamond-tipped drills to make straight cuts and clean round holes in floors, walls and driveways, so you can open up what you need without breaking out more concrete than the job calls for.
Most calls start with something that has to go through the concrete. You're adding a door to a foundation wall, running a drain or conduit under a garage floor, or taking out a cracked section so we can pour a new concrete driveway or patio against what stays. The job is to remove that piece and leave the rest sound, with an edge straight enough to build against.
The price moves with how thick the concrete is, how many feet we cut, whether it's a floor or a wall, how much steel is inside and how easily we can get the saw in. The schedule usually turns on any permit the job needs and the town's work hours. I walk the job first and give you the estimate in writing, so you know your own number before anything gets cut.
Picking the right concrete cutting method
The surface you need opened decides which saw comes out, and the water it runs on decides how the cleanup goes. Here's what's worth knowing before we start.
Flat sawing for floors
A walk-behind saw cuts straight lines across floors, slabs and driveways, so it's the usual tool for a trench or for cutting out a section to replace.
Wall sawing for openings
When you want a door or window in a foundation wall, wall sawing is the standard choice, because it cuts a clean, square opening in a standing wall.
Core drilling for round holes
A diamond-tipped drill pulls out a cylinder of concrete and leaves a smooth round hole. That's how plumbing, HVAC lines and electrical conduit usually get through.
Wet cutting and the slurry
We cut wet to cool the blade and hold down dust, then contain the slurry, because cement wash in a San Mateo County storm drain flows untreated into local creeks and the Bay.
Questions about cutting concrete
How much does concrete cutting cost in Atherton?
Professional concrete cutting across the US usually runs about $3 to $10 per linear foot of cut, so the length of your cut matters a lot. That's the going rate nationally, not our price. You get your own number in writing after I walk the job, for the reasons covered above.
How do I know what's inside my concrete slab before it gets cut?
The way to know is to scan the concrete first. Ground penetrating radar, a scanner that reads through concrete without damaging it, maps the steel and utility lines inside before anyone cuts or drills. It matters most on slabs with tensioned steel strands, because one cutting contractor's guide warns that cutting a strand releases its stored energy at once, which can shatter concrete, hurt someone and weaken what the slab can carry. That's why we talk with you about scanning before we cut.
Do I need a permit to cut concrete in Atherton?
The Atherton Building Department is the office to ask, since it issues permits for building, altering, demolishing and moving structures, and its list names that work rather than concrete cutting on its own. Whether your cut needs one comes down to what it's for. We look into permits before we quote, and when a job needs one, we handle the application and meet the inspector on site.
Does cutting a driveway near the street in Atherton need a permit?
Yes, the Town of Atherton requires an encroachment permit for any work in the public right-of-way, the public strip along the street, and that includes driveway work. If your cut reaches that far, we handle it like any other permit, and it gets built into the schedule from the start.
Does a concrete cutting contractor need a license in California?
Yes. California's contractor license rules name concrete sawing, breaking and coring as work under the concrete-related services class, so cutting is licensed work in this state.
How do I get my house ready for concrete cutting?
Plan on water being available on site, since most sawing runs wet, and clear a path so the saw can reach the spot. When you call, have the surface, the size of the cut or hole and whether it touches the street edge ready, because those decide the method and any permit.
Why Atherton homeowners call Premier Atherton Concrete to cut concrete
You get the person who quoted the job on site, a crew that's ours, and work backed by our satisfaction guarantee.
I walk the job myself
I'm the one who comes out, looks over the cut and writes your estimate, so nothing gets lost between people.
Our own crew on the saw
The crew that cuts your concrete works for us, not for a company we hand the job off to.
Running our own crew since 2021
I learned on other crews before starting this business in 2021, and we've been at it five years now.
Fully licensed and insured
That's the footing for any job where a saw runs close to your foundation, your pipes or the street.
Straight answers before we cut
Call (650) 516-3703 and I'll give you the honest version of your job, including the parts nobody fully controls.
Get your concrete cut measured and quoted
Call (650) 516-3703 any day between 6 a.m. and 11 p.m. with the surface, the size of the cut and whether it reaches the street.
What happens after you call about concrete cutting in Atherton?
We plan the cut around your house, the street and what's inside the concrete, so the town's rules and any permit are part of the schedule before the saw shows up.
Call or send the form
Reach us by phone or the form and tell us what needs cutting, roughly how big, and whether it touches the street.
I walk the site
I come out, look at the concrete and ask about trees, vehicles and where the water goes, since the slurry has to go somewhere we choose.
Your written estimate
You get the estimate in writing, and we sort out any permits. If the cut touches the street, the town usually processes that permit in 5 to 10 business days, and complex jobs can take longer.
Cutting and walkthrough
Atherton allows construction on weekdays from 8 a.m. to 5 p.m., with no work on legal holidays, so we cut inside those hours. Then we clean up and walk the finished work with you.